Description
Low-Cost Ubiquiti UFiber Loco GPON Optical Network Unit (ONT) 5 Pack. Sporting a sleek industrial design, the UFiber loco is a robust, high performance GPON CPE that features extremely low power consumption and the choice of 24V passive PoE or Micro-USB power.
Features
- The easy-to-read LEDs provide status information: Ethernet connection, signal strength, and power
- The UFiber loco can be powered by a Micro-USB Power Adapter or 24V passive PoE
- Up to 128 UFiber loco devices can be connected to a single GPON port
- Supporting GPON links of up to 20 km, the UFiber loco integrates with the UFiber OLT and third-party OLT devices
| Details | |
|---|---|
| Manufacturer's Code | UF-LOCO-5-AU |
| Dimensions | 76.5 x 76.5 x 26.4 mm (3.01 x 3.01 x 1.04") |
| Weight | 77 g (2.72 oz) |
| Networking Interface Speeds | (1) GPON WAN, ITU G.984, 2.488 Gbps Downstream, 1.244 Gbps Upstream, (1) GbE LAN, 10/100/1000 Mbps |
| Management | Interface In-Band Ethernet/PON |
| Normal Optical Power Range | TX (Class B+): 1.5 dBm to 5 dBm, RX: -28 dBm to -8 dBm |
| Power Method | Micro-USB: 5V, 1A, 24V Passive PoE (Pins +4, 5; -7, 8) |
| Power Supply | Micro-USB Power Adapter*: 5V, 1A |
| Max. Power Consumption | 3.5W |
| Supported Voltage Range | 4.7 to 5.3V |
| Processor Specs | MIPS32, 240 MHz |
| Memory Information | 128 MB DDR3 |
| Buttons | (1) Reset |
| Operating Temperature | -10 to 45° C (14 to 113° F) |
| Operating Humidity | 10 to 90% Noncondensing |
| Certifications | CE, FCC, IC |
Additional Information
Stock Available Onehunga: |
0 |
Stock Available St Lukes: |
0 |
Stock Available Wellington: |
0 |
Stock Available Supplier: |
0 |
