StarTech RJ45SPLITTER 2-to-1 RJ45 Splitter Cable Adapter - F/M

StarTech RJ45SPLITTER 2-to-1 RJ45 Splitter Cable Adapter F/M (Usage note in features)

Please Note: This product has a very specific usage. In order to use it as designed, you will need two of these splitters.
At one end of the installation, the splitter is designed to connect two patch cables from a network hub or switch to a single, network port in a building.
The other splitter connects to the opposite end of that network cable run in the building. It allows you to connect two network devices at 10/100 Mb devices.
The most common mistake our customers will make is they use a single splitter and connect one end of it to their network switch and then simply connect 2 ethernet cables to their devices. Unfortunately, that will not work.

2-to-1 RJ45 Splitter Cable Adapter - F/M

The RJ45SPLITTER 2-to-1 RJ45 Splitter Cable Adapter increases the number of RJ45 network connections on an RJ45 outlet, allowing two 10/100 Ethernet signals through a single Cat5/Cat5e wire. On one end of the installation the splitter enables you to connect two patch cables from a hub or switch to a single port on a patch panel; while on the other end of the installation the splitter connects to a single Cat5/Cat5e network drop through a wall outlet which can then be split and connected to two separate devices. The patch panel and wall outlet are connected through a single Cat5/Cat5e cable. Designed and constructed for maximum durability, this Ethernet Splitter Cable is backed by StarTech.com's Lifetime Warranty.

The StarTech Advantage

- Combine two cables into one RJ45 Wall outlet, and then split one Cat5/Cat5e line back out to two devices, using an RJ45SPLITTER at both ends of the installation
- Guaranteed reliability