A complete product range – from the simplest to the most complex motion control capable PLC
PLCopen compliant axis control
Simulation mode for offline debugging
Real-time fieldbus
Axis group for lineal and circular interpolation, CAM table functionality
Supports function block and function for encapsulation, code reusability, and scalability
ST, LD, SFC language support
Multiple communication protocols:
Modbus RTU/TCP
CANopen (optional)
Ethernet/IP (scanner)
Product Specifications
General Specifications
Item
Specifications
Program data capacity
● User program: 128 kB steps ● Customized variables: 1 MB (including 128 kB retentive at power failure) ● Soft elements: approx. 150 kB (retentive at power failure after No. 1000; non-retentive at power failure when only powered by USB)
Instruction processing speed
20,000 steps executed in 2 ms
Bit operation
0.144 μs/instruction
Word transmission
0.338 μs/instruction
Floating point operation
0.779 μs/instruction
Ethernet
Support for EtherNet/IP, Modbus TCP, Socket, and PROFINET slaves, FINS TCP and FINS UDP slaves, program upload and download, and firmware upgrade
EtherCAT communication
-
Number of axes supported
Maximum 5 axes (maximum 5 local pulse axes and 16 virtual axes)
Serial communication
Support for a maximum of three channels (one on the PLC itself and two through the expansion cards) Note: Expansion with the GL20-2S485 and GL20-2SCOM serial modules is supported.
CAN communication
Support for one master through an expansion card (requiring the firmware version of 5.65.2.0 or later and AutoShop version of 4.6.5.0 or later) ● CANlink: Maximum 62 slaves ● CANopen: Maximum 30 slaves and 16 axes
High-speed input
● Easy320-0808TN: Single-phase 8-channel at 200 kHz ● Easy320-0808TP: Single-phase 8-channel at 100 kHz
High-speed output
5 axes at 200 kHz; PWM supported
Expansion module
Maximum 16 local expansion modules
Expansion card
Maximum two expansion cards
Programming language
LD, SFC; FB/FC supported (LD)
Type-C
Support for user program upload and download and firmware upgrade through the Type-C port or a GE20-TF memory expansion card
IP rating
IP20
Dimensions (W x H x D)
53 mm x 100 mm x 80 mm
Weight
Approx. 184 g
Power Supply Specifications
Item
Specifications
Rated voltage of terminal input power
24 VDC±10% (21.6 VDC to 26.4 VDC)
Rated current of terminal input power
1 A (maximum value at 24 V)
Rated voltage of bus output power
5 VDC (4.75 VDC to 5.25 VDC)
Rated current of bus output power
2 A (typical value at 5 V)
24 V input power protection
Protection against short circuit and reverse connection
Hot swapping
Not supported
Input Specifications
Item
Specifications
Input type
Digital input
Number of input channels
8
Input mode
Sink/Source
Input voltage class
24 VDC±10% (21.6 VDC to 26.4 VDC)
High-speed input (X0 to X7)
Input current when input is ON
● Easy320-0808TN: > 4 mA ● Easy320-0808TP: > 2.5 mA
Input current when input is OFF
● Easy320-0808TN: < 2.5 mA ● Easy320-0808TP: < 1.5 mA
Hardware response time
2 μs (RC time)
Maximum input frequency
200 kHz
Input impedance
3.4 kΩ
ON voltage
≥ 15 VDC
OFF voltage
≤ 5 VDC
Software filter time
● Low-speed: 2 ms to 1,000 ms ● High-speed: 2 μs to 1,000 μ
Isolation mode
Capacitive isolation for integrated chip
Common terminal mode
8-point/common terminal (positive/ negative polarity of input power being changeable)
Input action display
The input indicator lights up (controlled by software) when the input is in drive state
